Tools & materials
Tools
- Screwdriver or socket if required
- Shop vacuum
Parts / materials
- Correct engine air filter
Preparation
- Engine off and cool; compare the replacement part before opening the airbox.
Step by step
- 01Release the housing clips or screws without stressing attached wiring.
- 02Note filter orientation, remove it, and block debris from the clean side.
- 03Vacuum loose debris without dropping anything into the intake.
- 04Seat the new filter evenly and close every tab, clip, and screw.
What success looks like
The housing closes flush with no pinched seal or loose connector.
Common mistakes
- Wrong filter
- Damaging airbox tabs
- Leaving a sensor unplugged
- Pinching the seal
Call a professional
Seek help for damaged intake parts, warning lights after service, or inaccessible filters.